<?xml version="1.0" encoding="UTF-8"?>
<rss version="2.0" xmlns:atom="http://www.w3.org/2005/Atom">
  <channel>
    <title>Trivial Perhaps</title>
    <description>Working with my hands and camera</description>
    <link>https://trivialperhaps.com/</link>
    <atom:link href="https://trivialperhaps.com/feed.xml" rel="self" type="application/rss+xml"/>
    <pubDate>Wed, 18 Nov 2026 09:47:08 +0100</pubDate>
    <lastBuildDate>Wed, 18 Nov 2026 09:47:08 +0100</lastBuildDate>
    <generator>Jekyll v3.10.0</generator>
    
      <item>
        <title>AI driver or AI driven</title>
        <description>&lt;p&gt;AI driven work in IT makes a lot of really hard things very easy. It can extract huge amounts of data, convert it into a visual representation that would takes days to develop and spit it out in a matter of minutes.&lt;/p&gt;

&lt;p&gt;It can have people with surface-level knowledge of an area or problem spit out double digit design documents in a matter of minutes.&lt;/p&gt;

&lt;p&gt;It can create beautiful prototypes from really rough designs compared with loosely described use cases - also just in a matter of minutes.&lt;/p&gt;

&lt;p&gt;It can do just about anything in just about no time.&lt;/p&gt;

&lt;p&gt;But is it actually making us achieve more valuable work?&lt;/p&gt;

&lt;p&gt;&lt;a id=&quot;org4c9c518&quot;&gt;&lt;/a&gt;&lt;/p&gt;

&lt;h1 id=&quot;whos-in-the-driver-seat&quot;&gt;Who’s in the driver seat?&lt;/h1&gt;

&lt;p&gt;AI driven development and AI driven “just-about-anything” has made it very easy to spit out what only months or years ago would have taken a whole team months or years to accomplish in mere minutes. It can make people output seem “super-human” - which in many cases it is.&lt;/p&gt;

&lt;p&gt;But does it actually make us achieve more of what matters?&lt;/p&gt;

&lt;p&gt;I have started to seriously doubt it.&lt;/p&gt;

&lt;p&gt;I am sure that AI will only be getting better and better and that the future looks very fragile for all us meat-proxies making a living in front of computers.&lt;/p&gt;

&lt;p&gt;&lt;a id=&quot;orgeb4b267&quot;&gt;&lt;/a&gt;&lt;/p&gt;

&lt;h1 id=&quot;are-we-being-driven-round-in-circles&quot;&gt;Are we being driven round in circles&lt;/h1&gt;

&lt;p&gt;But currently I believe that we being driven around by AI more than we are in control of where AI is driving.&lt;/p&gt;

&lt;p&gt;I have seen and spent so much time on output either in form of documents, prototypes and  visualizations that looks and are extremely impressive. They take on a lot of time looking through a lot of time impressing everyone and then ends up being the solution that goes around looking for a problem.&lt;/p&gt;

&lt;p&gt;Meaning that I see close to half of what AI is used for is giving extremely impressive output that should never have been created in the first place. Long design documents that someone has to sit down read through, come up with an opinion about and in some cases spent exhorbitant amount of time defending against it as being the right solution.&lt;/p&gt;

&lt;p&gt;Or data visualizations that are pretty to look at, can pull in all sorts of data from different sources and link it together, swallow up clever peoples minds on how to enrich even further, when in reality what it shows could have been derived and understood well enough from existing sources and now has ended up being a source of truth that again requires too much time being spent on defending or trying to enrich even further - when the task of creating it in the first place was never a task on anyones backlog.&lt;/p&gt;

&lt;p&gt;&lt;a id=&quot;org7122631&quot;&gt;&lt;/a&gt;&lt;/p&gt;

&lt;h1 id=&quot;it-is-not-what-can-be-created-it-is-what-should&quot;&gt;It is not what can be created it is what should&lt;/h1&gt;

&lt;p&gt;What many people recognized and has known for a very long time is that IT in general and development especially it was never a question of what can be created or spent time on. It was always a question of what should.&lt;/p&gt;

&lt;p&gt;An under-funded IT department paired with a over-funded business department shows this brilliantly. It always ends up with a huge mess of applications - all solving actual business needs - but each being developed by either semi-capable business-developers or external consultancies solving the assignment they are presented with to the specification required.&lt;/p&gt;

&lt;p&gt;But no one ever looks at the big picture trying to figure out what are things we not only can solve but things we should solve. What is our core business and how do we build, protect and evolve that in a sustainable way while outsourcing or buying things that are outside of that.&lt;/p&gt;

&lt;p&gt;Maybe sometime in the future it won’t matter and every business is controlled and maintained entirely by AI, but where we stand currently we should seriously consider whether we are in the driver seat or whether we are being driven around.&lt;/p&gt;

&lt;p&gt;AI is now good enough that it can solve almost any task we throw at it - also the ones that should never have been solved in the first place. Nothing is free there is always an opportunity cost.&lt;/p&gt;

</description>
        <pubDate>Sat, 14 Nov 2026 07:46:04 +0100</pubDate>
        <link>https://trivialperhaps.com/ai-driver-or-ai-driven</link>
        <guid isPermaLink="true">https://trivialperhaps.com/ai-driver-or-ai-driven</guid>
        
        
        <category>ai</category>
        
        <category>technology</category>
        
      </item>
    
      <item>
        <title>Changing valve guides yourself</title>
        <description>&lt;p&gt;This is the first time I have tried to change valve guides, so please take the following with that huge caveat.&lt;/p&gt;

&lt;p&gt;Initially I had not planned to renovate the cylinder head on my 1959 Triumph Bonneville. I knew the valve guides were shot and I even had a piece of carbon that has made a dent in the seat and valve on one of the exhaust ports. But as I was in for quite a lot of money on the bottom end already I had decided to wait with the cylinder head. But then time went and I did not finish the Triumph last year. So with another winter wrenching season I thought about renovating the head as well.&lt;/p&gt;

&lt;p&gt;Having already delivered the cylinders for boring to oversize pistons I had thought about using the same machine shop for the cylinder head. But as it is now close to a month since I delivered the cylinders I became worried that the head work would take too long to finish. This sparked idea about doing it myself and I started looking for tools to do the valve seats as well.&lt;/p&gt;

&lt;p&gt;By some stroke of luck there was someone not too far away from me who sold an old tool set to do exactly this.&lt;/p&gt;

&lt;p&gt;&lt;img src=&quot;/images/changing-valve-guides/DSCF9395_.jpg&quot; alt=&quot;Valve seat tool set&quot; /&gt;&lt;/p&gt;

&lt;p&gt;With that tool in hand I just needed to remove the old valve seats, insert new one and use the tool to fix the seats.&lt;/p&gt;

&lt;p&gt;I looked up a lot of guides on how to remove the old seats and found two methods I could use with the tool I have available.&lt;/p&gt;

&lt;p&gt;One is to hammer it through with a dovel. Here I could use a 8mm bolt that fit the guides of the Triumph pretty close.&lt;/p&gt;

&lt;p&gt;The other is to use another 8mm bolt going all the way through the guide and with a pipe fitting over the guide and protruding past it then “pulling” it through by tightening the nut.&lt;/p&gt;

&lt;p&gt;In the end I used a combination of the two methods.&lt;/p&gt;

&lt;p&gt;First I blasted the head in the sand blaster. I read that it was a good idea to remove as many carbon deposits around the valve guide as posible as it could otherwise damage the cylinder head when you push the valve guides back out trough the head.&lt;/p&gt;

&lt;p&gt;Luckily we had just got a new sand blaster in the garage recently so I could put that to good use.&lt;/p&gt;

&lt;p&gt;&lt;img src=&quot;/images/changing-valve-guides/DSCF9404_Fujifilm%20X-T2,%20Fujifilm%20simulations,%20Fujinon,%20Motorcycle,%20Tri-X,%20Triumph%20T120,%20XF%2018mm%20F2.jpg&quot; alt=&quot;Cylinder head in sand blaster&quot; /&gt;&lt;/p&gt;

&lt;p&gt;I did not make any “before” images but hopefully it is possible to see that the protrusion of the valve guides are clean and hence ready to be worked on.&lt;/p&gt;

&lt;p&gt;&lt;img src=&quot;/images/changing-valve-guides/DSCF9405_Fujifilm%20X-T2,%20Fujifilm%20simulations,%20Fujinon,%20Motorcycle,%20Tri-X,%20Triumph%20T120,%20XF%2018mm%20F2.jpg&quot; alt=&quot;Cylinder head in sand blaster&quot; /&gt;&lt;/p&gt;

&lt;p&gt;Next step was to put the cylinder head in the oven. I could not find exact information about degrees, but I ended up putting the oven on 125-150 degress celcius and all in all the head was there for probably 30-40 minutes.&lt;/p&gt;

&lt;p&gt;I had it out after 20 minutes and tried driving the guides out, but only the intake guides moved at that point, so I put it back in the oven and gave it 10-15 minutes more.&lt;/p&gt;

&lt;p&gt;Initially when I tried driving out the valve guides I just had a 8mm bolt and a nut about halfway up so that half of the bolt went down into the guide and could help steer. This worked fine for the intake guides, but the exhaust guides were a lot more stubborn.&lt;/p&gt;

&lt;p&gt;In order for them to move at all I tried to have a bolt go all the way through and then with a pipe resting against the head, then tighten the nut to pull the valve guide through.&lt;/p&gt;

&lt;p&gt;&lt;img src=&quot;/images/changing-valve-guides/DSCF9408_Fujifilm%20X-T2,%20Fujifilm%20simulations,%20Fujinon,%20Motorcycle,%20Tri-X,%20Triumph%20T120,%20XF%2018mm%20F2.jpg&quot; alt=&quot;Valve guide extraction setup&quot; /&gt;&lt;/p&gt;

&lt;p&gt;They did how ever not bodge at all to begin with. But while I tightened the nut and then hit the head of the bolt, the guide started moving. I did that a few times and then switched to a strategy of hitting a bolt with a nut halfway up the thread.&lt;/p&gt;

&lt;p&gt;I also think this is where I made the first mistake. While hitting on the bolt with a hammer it slipped and I made a mark in the area between the combustion chamber and the gasket surface.&lt;/p&gt;

&lt;p&gt;&lt;img src=&quot;/images/changing-valve-guides/DSCF9413_Fujifilm%20X-T2,%20Fujifilm%20simulations,%20Fujinon,%20Motorcycle,%20Tri-X,%20Triumph%20T120,%20XF%2018mm%20F2.jpg&quot; alt=&quot;Mark in head&quot; /&gt;&lt;/p&gt;

&lt;p&gt;I should have either used a long dovel made for the job or I should have used an umbraco bolt and then a long dovel inside that to drive the valve guide out. Then the blows from the hammer would be further away from the head and hence the risk of me hitting it diminished.&lt;/p&gt;

&lt;p&gt;The next issue was that I only has 30-40 mm of thread inside the valve guide to “steer” as I had put the nut half way up the bolt. Hence when I really had to hit it hard to drive the exhuast guides out, I bend the mouth of the valve guide slightly. This was mistake number 2. The bolt should have been almost all the way through the valve guide to steer the force of the blow as much as possible.&lt;/p&gt;

&lt;p&gt;At this point I needed to grind down the nut in order to have it follow the guides all the way through the cylinder head.&lt;/p&gt;

&lt;p&gt;&lt;img src=&quot;/images/changing-valve-guides/DSCF9406_Fujifilm%20X-T2,%20Fujifilm%20simulations,%20Fujinon,%20Motorcycle,%20Tri-X,%20Triumph%20T120,%20XF%2018mm%20F2.jpg&quot; alt=&quot;Ground down tool&quot; /&gt;&lt;/p&gt;

&lt;p&gt;So I once I had ground them I threaded them almost all the way up to the head to have as much “guidance” from the bolt through the guide as possible.&lt;/p&gt;

&lt;p&gt;&lt;img src=&quot;/images/changing-valve-guides/DSCF9407_Fujifilm%20X-T2,%20Fujifilm%20simulations,%20Fujinon,%20Motorcycle,%20Tri-X,%20Triumph%20T120,%20XF%2018mm%20F2.jpg&quot; alt=&quot;Marks from bolt in head&quot; /&gt;&lt;/p&gt;

&lt;p&gt;This worked, and I got the exhaust valve guide out, but I made a slight mistake here as well. Mistake number 3.&lt;/p&gt;

&lt;p&gt;If you look at the hole where the valve guide was on the picture below you can see marks from the head of the 8mm bolt hitting the surface.&lt;/p&gt;

&lt;p&gt;&lt;img src=&quot;/images/changing-valve-guides/DSCF9411_Fujifilm%20X-T2,%20Fujifilm%20simulations,%20Fujinon,%20Motorcycle,%20Tri-X,%20Triumph%20T120,%20XF%2018mm%20F2.jpg&quot; alt=&quot;Marks in valve guide hole&quot; /&gt;&lt;/p&gt;

&lt;p&gt;I should have used an umbraco bolt or ground down the head of the bolt to make it go through the hole together with the valve guide.&lt;/p&gt;

&lt;p&gt;But with those lessons archived I had all the 4 guides removed.&lt;/p&gt;

&lt;p&gt;Now I just needed to install the new ones.&lt;/p&gt;

&lt;p&gt;I had put the new guides in the fridge about the same time as I put the head in the oven. Unfortunately we do not have a freezer at the garage, so I had to make do with the fridge. Putting them in the freezer may have kept me from doing mistake number 4, but then I would not have learnt from that mistake.&lt;/p&gt;

&lt;p&gt;To drive the new guides in while the head was warm and the guides were cold’ish, I used an 8mm bolt again, this time inserted all the way through and then used a dovel on top of it which I hit with a hammer. This worked fine and they went in without too much effort.&lt;/p&gt;

&lt;p&gt;&lt;img src=&quot;/images/changing-valve-guides/DSCF9412_Fujifilm%20X-T2,%20Fujifilm%20simulations,%20Fujinon,%20Motorcycle,%20Tri-X,%20Triumph%20T120,%20XF%2018mm%20F2.jpg&quot; alt=&quot;Driving in new valve guides&quot; /&gt;&lt;/p&gt;

&lt;p&gt;Or at least I thought so. Because once I had all of them installed and I tried to put a valve through I could feel a bit of tension right around the edge of where the bolt head had been and where I had been hitting. So the blows had been enough to make a slight collar at the edge.&lt;/p&gt;

&lt;p&gt;I should have found an aluminum pipe that fitted outside the guide and onto the collar of the guide. That combined with a freezer could have made the installation easier and avoided me having to ream the holes for the valves.&lt;/p&gt;

&lt;p&gt;Now I had to buy a reamer for the valve guides in order to make sure that they have the right fit with the valves.&lt;/p&gt;

&lt;p&gt;In some way I should have been annoyed by all the mistakes I made during this change of valve guides. But as I have been thinking about starting a business or working with engines at a shop, these mistakes suddenly appeared as learnings that I was happy I had on my own material.&lt;/p&gt;

&lt;p&gt;If I had made the same mistakes on another persons engine then I would have been really embarressed. Now I learned the lessons and had fun doing so.&lt;/p&gt;

&lt;p&gt;The best learning environment.&lt;/p&gt;

&lt;p&gt;Now the next job is using my newly bought used valve seat tool to do the valve seats.&lt;/p&gt;

&lt;p&gt;That will probably be what I write about next.&lt;/p&gt;

&lt;p&gt;See you then.&lt;/p&gt;
</description>
        <pubDate>Sun, 19 Jan 2025 07:46:04 +0100</pubDate>
        <link>https://trivialperhaps.com/removing-valve-guides-yourself</link>
        <guid isPermaLink="true">https://trivialperhaps.com/removing-valve-guides-yourself</guid>
        
        
        <category>motorcycle</category>
        
        <category>engine</category>
        
      </item>
    
      <item>
        <title>Being of use to someone</title>
        <description>&lt;p&gt;I am currently reading “The courage to be disliked” by Ichiro Kishimi which in many ways is a provocative and contemplative read. When I finish it I will have to summarise my thoughts in some way to both remember some of the good points it presents but also digest the full scope of it.&lt;/p&gt;

&lt;p&gt;But today I will write about a point that stuck with me after reading the book in bed last night.&lt;/p&gt;

&lt;p&gt;The book deals with “Adlerian psychology” or also called “individual psychology” named after the Austrian psychiatrist Alfred Adler.&lt;/p&gt;

&lt;p&gt;As mentioned earlier there are lots of “provocative” or “contemplative” points in the book but the one I stumbled upon last night was explained in this quote:&lt;/p&gt;

&lt;blockquote&gt;
  &lt;p&gt;That one can act on the community, that is to say, on other people, and that one can feel “I am of use to someone.” Instead of feeling judged by another person as “good,” being able to feel, by way of one’s own subjective viewpoint, that “I can make contributions to other people.” It is at that point that, at last, we can have a true sense of our own worth.&lt;/p&gt;
&lt;/blockquote&gt;

&lt;p&gt;The main point here that stuck with me, and is also the title of this post is this:&lt;/p&gt;

&lt;blockquote&gt;
  &lt;p&gt;“I am of use to someone.”&lt;/p&gt;
&lt;/blockquote&gt;

&lt;p&gt;Having worked more than 15 years in IT I am somewhat struggling to find examples of when I felt “I was of use to someone.” Apart from my direct leader of course.&lt;/p&gt;

&lt;p&gt;To give a bit of context I am currently a few months into a “hiatus” after my last freelance contract where I was burned by people I thought I could trust. So I spent the first couple of months with a strong aversion towards my job in IT and the entire sector. But slowly I am getting back into a mindset that opens the door for future contracts. But this pattern has been repeated a few times over the last couple of years. Having to take some months off after a contract because I felt burned out. Luckily I have been in the fortunate and privileged situation that I had enough saved up for these “hiatuses” to even be a possibility.&lt;/p&gt;

&lt;p&gt;If I dig deep in my memory, I may be able to find the feeling of “being of use to someone” when I started out making booking systems for airlines. I do not know whether it was the fact that this was one of my first jobs in IT or it has something to do with the fact that it felt more relatable. But I might be able to find a “use to someone” as being the passengers that was able to book and get easier, cheaper and better experiences.&lt;/p&gt;

&lt;p&gt;But since then I have worked a lot in finance, even with a short stint in a major digital infrastructure project here in Denmark. What all of the tasks and projects have in common is; a very long distance from the end user and no way to see that what we created, was of any real use to anyone.&lt;/p&gt;

&lt;p&gt;My realization last night was that this may be why I keep getting a feeling of burnout. The main beneficiary of a lot of the work I have done has been organizations that already had too much money. It felt more like I was benefitting them than I was benefitting any of my “peers” or the community at large.&lt;/p&gt;

&lt;p&gt;In some projects I would even go as far as saying I could not even see a beneficiary at all, as they felt more like spinning the wheels, was stopped half way or just closely resembled “busy work”.&lt;/p&gt;

&lt;p&gt;I think the lightbulb that ignited yesterday made me realize that I need to find jobs or projects where I feel like I can “be of use to someone.”&lt;/p&gt;

&lt;p&gt;I like the freedom of freelancing, the ability to be well paid and the freedom it gives to take time off.&lt;/p&gt;

&lt;p&gt;But perhaps I won’t need the ability to take months off if I can just find work which has a clear feeling of “being of use to someone.” Then maybe I can live with a smaller salary and less freedom. Because no matter how I put it working in the IT sector will be privileged in terms of salary and freedom.&lt;/p&gt;

</description>
        <pubDate>Fri, 20 Dec 2024 07:46:04 +0100</pubDate>
        <link>https://trivialperhaps.com/being-of-use-to-someone</link>
        <guid isPermaLink="true">https://trivialperhaps.com/being-of-use-to-someone</guid>
        
        
        <category>programming</category>
        
        <category>management</category>
        
      </item>
    
      <item>
        <title>Fabricating wide pegs for XT600</title>
        <description>&lt;p&gt;Preparing for a light enduro/off road event I wanted to have wider pegs for my 1987 Yamaha XT600. This makes it less straining to stand up for extended periods of time.&lt;/p&gt;

&lt;p&gt;It is of course possible to buy wider foot pegs, but as I wanted them to be steel, for the added strength they also became more expensive than I wanted. This gave me the idea to just make them myself.&lt;/p&gt;

&lt;p&gt;I already had the original steel ones that I could fabricate an “outer ring” for.&lt;/p&gt;

&lt;p&gt;So this was the plan. Fabricate an “outer ring” for the original ones and weld them.&lt;/p&gt;

&lt;p&gt;My approach would be to cut a flat piece of 2,5 mm steel plate to the length required to reach all the way around the original ones. It would be “double” width as I would then drill holes along the middle of it and finally cut it into the two corresponding parts, one for each side. This hopefully would make them more uniform than doing them one by one.&lt;/p&gt;

&lt;p&gt;First the rough sketch having traced the original foot peg as the inner half-circle I drew the “outer ring” somewhat free hand, which gave me a measure of a little under 18 cm for the full length.&lt;/p&gt;

&lt;p&gt;&lt;img src=&quot;/images/fabricating-wide-xt600-pegs/DSCF2012_Fujifilm%20X-Pro3,%20Fujifilm%20simulations,%20Fujinon,%20Lighthouse,%20Motorcycle,%20Places,%20Tiki%20Chop%20Shop,%20XF%2023mm%202%20WR,%20XT600.jpg&quot; alt=&quot;Initial sketch&quot; /&gt;&lt;/p&gt;

&lt;p&gt;I then cut out a matching piece of 2,5mm steel plate in 3 cm width as each individual ring should have a height of just under 1,5 cm (as some height would be lost by the cut itself).&lt;/p&gt;

&lt;p&gt;After the piece was cut I traced a line down the middle of it and started laying out the holes I needed to drill. For the spacing between them I measured both the original ones, where the width between varied and some aftermarket ones other people in my garage had. This led me to space them out at 10mm apart.&lt;/p&gt;

&lt;p&gt;Once I had layed out all the holes I cut the length so that each end had a hole 10mm in.&lt;/p&gt;

&lt;p&gt;&lt;img src=&quot;/images/fabricating-wide-xt600-pegs/DSCF2013_Fujifilm%20X-Pro3,%20Fujifilm%20simulations,%20Fujinon,%20Lighthouse,%20Motorcycle,%20Places,%20Tiki%20Chop%20Shop,%20XF%2023mm%202%20WR,%20XT600.jpg&quot; alt=&quot;Laying out holes&quot; /&gt;&lt;/p&gt;

&lt;p&gt;With this done it was time for the drill press. I started with 2,5mm holes and then I used a 7mm drill for the end result.&lt;/p&gt;

&lt;p&gt;&lt;img src=&quot;/images/fabricating-wide-xt600-pegs/DSCF2014_Fujifilm%20X-Pro3,%20Fujifilm%20simulations,%20Fujinon,%20Lighthouse,%20Motorcycle,%20Places,%20Tiki%20Chop%20Shop,%20XF%2023mm%202%20WR,%20XT600.jpg&quot; alt=&quot;Drill press&quot; /&gt;&lt;/p&gt;

&lt;p&gt;Once all the holes was done I needed to find something I could bend the metal around to get the right shape of the pegs. As I had created a sketch I could easily go around the shop looking for things that somewhat matched the curve I had drawn.&lt;/p&gt;

&lt;p&gt;Luckily I found a hammer that had the perfect curve.&lt;/p&gt;

&lt;p&gt;&lt;img src=&quot;/images/fabricating-wide-xt600-pegs/DSCF2015_Fujifilm%20X-Pro3,%20Fujifilm%20simulations,%20Fujinon,%20Lighthouse,%20Motorcycle,%20Places,%20Tiki%20Chop%20Shop,%20XF%2023mm%202%20WR,%20XT600.jpg&quot; alt=&quot;Bending around a hammer&quot; /&gt;&lt;/p&gt;

&lt;p&gt;The metal was soft enough for me to just bend it with my hands. Hence it was easier than I had imagined.&lt;/p&gt;

&lt;p&gt;&lt;img src=&quot;/images/fabricating-wide-xt600-pegs/DSCF2016_Fujifilm%20X-Pro3,%20Fujifilm%20simulations,%20Fujinon,%20Lighthouse,%20Motorcycle,%20Places,%20Tiki%20Chop%20Shop,%20XF%2023mm%202%20WR,%20XT600.jpg&quot; alt=&quot;Outer ring and foot peg&quot; /&gt;&lt;/p&gt;

&lt;p&gt;With the bend in the right shape I had to make the cut to separate them as the rest of the process had to be done with each of the sides individually.&lt;/p&gt;

&lt;p&gt;&lt;img src=&quot;/images/fabricating-wide-xt600-pegs/DSCF2017_Fujifilm%20X-Pro3,%20Fujifilm%20simulations,%20Fujinon,%20Lighthouse,%20Motorcycle,%20Places,%20Tiki%20Chop%20Shop,%20XF%2023mm%202%20WR,%20XT600.jpg&quot; alt=&quot;Two pieces separately&quot; /&gt;&lt;/p&gt;

&lt;p&gt;At this point I needed to figure out how to attach them to the original foot pegs. I needed a somewhat strong attachment and also needed to think about the potential bending forces as I now would be creating a wider lever. If I stand all the way forward or back on the new “outer ring” then the beinding forced needs to be absorbed by as much of the original peg as possible.&lt;/p&gt;

&lt;p&gt;Hence I created some “deep” mounts closest to the bike that would go a long way below the outer ring and help spread the load.&lt;/p&gt;

&lt;p&gt;&lt;img src=&quot;/images/fabricating-wide-xt600-pegs/DSCF2018_Fujifilm%20X-Pro3,%20Fujifilm%20simulations,%20Fujinon,%20Lighthouse,%20Motorcycle,%20Places,%20Tiki%20Chop%20Shop,%20XF%2023mm%202%20WR,%20XT600.jpg&quot; alt=&quot;Mounting points&quot; /&gt;&lt;/p&gt;

&lt;p&gt;This of course is difficult to see from this angle, but I will try to get some better images next time.&lt;/p&gt;

&lt;p&gt;I did not get any farther that this yesterday, so next time I will hopefully get them finished.&lt;/p&gt;

&lt;p&gt;I am also not 100% certain on what design I will go for with regards to the mounting points near the end of the peg. It will probably be two mounting point, but whether they will be parallel to the ones closer to the bike or be further out with more of an angle - I have yet to decide.&lt;/p&gt;

</description>
        <pubDate>Mon, 28 Oct 2024 07:46:04 +0100</pubDate>
        <link>https://trivialperhaps.com/fabricating-wide-pegs-xt600</link>
        <guid isPermaLink="true">https://trivialperhaps.com/fabricating-wide-pegs-xt600</guid>
        
        
        <category>motorcycles</category>
        
        <category>fabrication</category>
        
      </item>
    
      <item>
        <title>Luftgekuhlt Copenhagen</title>
        <description>&lt;p&gt;I had the great opportunity to see the Porsche aircooled car/art show “Luftgekuhlt” in Copenhagen this Saturday. To the best of my knowledge it is a show that started in California and has since expanded to include a few satellite shows around the World each year. And this Saturday it was held at the Wilhelm Lauritzen terminal in Copenhagen right next to Copenhagen Airport.&lt;/p&gt;

&lt;p&gt;When we first arrived, we actually managed to walk into what appeared to be the parking lot for trailors etc. But in true spirit of the event, this parking lot was also filled with a lot of special vehicles. This perfectly specced red 964 being one of them.&lt;/p&gt;

&lt;p&gt;&lt;img src=&quot;/images/luftgekuhlt-copenhagen/DSC_1194.JPG&quot; alt=&quot;Red Porsche 964&quot; /&gt;&lt;/p&gt;

&lt;p&gt;Walking back and in through the right gate we were met with an astonishing view. Hundreds of old aircooled Porsches parked around the old Vilhelm Lauritzen terminal and nearby hangars.&lt;/p&gt;

&lt;p&gt;The first car that caught my eye was this very beautiful Porsche 356 Speedster.&lt;/p&gt;

&lt;p&gt;&lt;img src=&quot;/images/luftgekuhlt-copenhagen/DSC_1196.JPG&quot; alt=&quot;Blue Porsche 356 Speedster&quot; /&gt;
&lt;img src=&quot;/images/luftgekuhlt-copenhagen/DSC_1197.JPG&quot; alt=&quot;Blue Porsche 356 Speedster interior&quot; /&gt;&lt;/p&gt;

&lt;p&gt;Porsche 356’s has always been close to my heart as my first job as a teenager was making sheet metal parts for these. Unfortunately this was also the day that I learned that my old boss from back them had passed away a few years ago. But his company was continued in the same spirit by someone new. Hearing about him passing away started a lot of reflections on my part. But maybe that is for another time.&lt;/p&gt;

&lt;p&gt;Next to the 356 Speedster and with one end of the Vilhelm Lauritzen terminal as the background was this black Porsche 993&lt;/p&gt;

&lt;p&gt;&lt;img src=&quot;/images/luftgekuhlt-copenhagen/DSC_1200.JPG&quot; alt=&quot;Black Porsche 993&quot; /&gt;&lt;/p&gt;

&lt;p&gt;And yes, I know. I should have watched the edges of my frame and walked back a step or two to include both the rear of the car as well as the wall on the left.&lt;/p&gt;

&lt;p&gt;The next image turned out a little different than what I had in mind. I actually wanted to show the details of the interior, but it ended up being much more about the reflection than the interior. Which I like!&lt;/p&gt;

&lt;p&gt;&lt;img src=&quot;/images/luftgekuhlt-copenhagen/DSC_1202.JPG&quot; alt=&quot;Porsche interior with reflection&quot; /&gt;&lt;/p&gt;

&lt;p&gt;There is an image later in this piece where my subject was the reflection in the window, but in this case it accidentally happened and perhaps even ended up being better than the one I created on purpose. But as I shoot all my images with the rear screen closed I do not really pick up on these things until I transfer the images to the computer.&lt;/p&gt;

&lt;p&gt;If I had picked up on it, then it would have been better to take a step back and not have either of the yellow cars cut off.&lt;/p&gt;

&lt;p&gt;The next image was much more “successful” in capturing the interior. Whether the former is a better image is up for debate though.&lt;/p&gt;

&lt;p&gt;&lt;img src=&quot;/images/luftgekuhlt-copenhagen/DSC_1203.JPG&quot; alt=&quot;Porsche interior&quot; /&gt;&lt;/p&gt;

&lt;p&gt;This next image I am a bit unsure about. Seeing it here and writing a story where it is included I think that it should be accompanied by a full image of the car. Meaning that when I in retrospect look at a detail shot I imagine that a reader would want to see how the full car looks like. But I did not capture such an image unfortunately.&lt;/p&gt;

&lt;p&gt;But that is a note to myself for next time.&lt;/p&gt;

&lt;p&gt;&lt;img src=&quot;/images/luftgekuhlt-copenhagen/DSC_1205.JPG&quot; alt=&quot;White Porsche rear&quot; /&gt;&lt;/p&gt;

&lt;p&gt;The following image does work by itself without having a full view of the car as the subject here is the gloves and not the car itself.&lt;/p&gt;

&lt;p&gt;&lt;img src=&quot;/images/luftgekuhlt-copenhagen/DSC_1207.JPG&quot; alt=&quot;Driving gloves&quot; /&gt;&lt;/p&gt;

&lt;p&gt;What makes this image stand out for me is the light framing of the open window as well as the contrast of brown color.&lt;/p&gt;

&lt;p&gt;Walking around all these cars at a show filled with people you have to get creative to get some images that does not contain too many people. One of my attempts at being creative is this shot where the chrome hub cap reflects the 964 Turbo that is next to it.&lt;/p&gt;

&lt;p&gt;&lt;img src=&quot;/images/luftgekuhlt-copenhagen/DSC_1214.JPG&quot; alt=&quot;Reflection in hub cap&quot; /&gt;&lt;/p&gt;

&lt;p&gt;There are two issues with this image for me. One is minor and that is the reflection of the other people taking a picture of this car. The other issue is that the car in itself is too bright red and takes away focus from the reflection. I have another shot at a later point where I try to do the same trick but with a brown car. This makes the reflection stand out more, but the issue with that image is that the reflection is not a very distinct shape. You cannot clearly see that it is a Porsche in the reflection as you can with the red one.&lt;/p&gt;

&lt;p&gt;&lt;img src=&quot;/images/luftgekuhlt-copenhagen/DSC_1239.JPG&quot; alt=&quot;Reflection in hub cap brown car&quot; /&gt;&lt;/p&gt;

&lt;p&gt;The next car has a special story as it was the first Porsche 964 Turbo 3.6 liter sold in Denmark. It was found in Norway and brought back to Denmark very recently. The guy who brought it back had an image from Porsche in Copenhagen where the guy who had prepared it for delivery in the 90’s sits in it a few days before this show and could clearly remember it from back in the 90’s.&lt;/p&gt;

&lt;p&gt;&lt;img src=&quot;/images/luftgekuhlt-copenhagen/DSC_1218.JPG&quot; alt=&quot;Red Porsche 964 Turbo&quot; /&gt;&lt;/p&gt;

&lt;p&gt;Apart from the history it is just such a beautiful car. One of the best shapes of 911 in my opinion.&lt;/p&gt;

&lt;p&gt;Inside the hangar there was these to almost identical cars parked with the rears towards each other. It just invited for a picture like this.&lt;/p&gt;

&lt;p&gt;&lt;img src=&quot;/images/luftgekuhlt-copenhagen/DSC_1223.JPG&quot; alt=&quot;Green and orange rears&quot; /&gt;&lt;/p&gt;

&lt;p&gt;If only they would have placed them with the vertical line on the wall exactly between them…&lt;/p&gt;

&lt;p&gt;Then we come to the image I mentioned earlier where I tried to be clever with the reflection in a window of a 356. I was not able to pull it off completely as the space between the pillars in the windows did not allow for the full view of the 964 Turbo I had as the subject. But I still think it ended up being okay.&lt;/p&gt;

&lt;p&gt;&lt;img src=&quot;/images/luftgekuhlt-copenhagen/DSC_1236.JPG&quot; alt=&quot;Reflection of red 964 Turbo&quot; /&gt;&lt;/p&gt;

&lt;p&gt;And then we are at the last photo I wanted to share. Here I very clearly wanted to frame the car inside the space between the upper part of the “t” and the “b” in Turbo. I think it worked but I would have loved to have the image without any people in it.&lt;/p&gt;

&lt;p&gt;&lt;img src=&quot;/images/luftgekuhlt-copenhagen/DSC_1245.JPG&quot; alt=&quot;Turbo framing&quot; /&gt;&lt;/p&gt;

&lt;p&gt;But then I probably need to write a lot more of these pieces, get noticed and somehow gain access before the general public. Working with the access I have I am quite content with what I got out of it.&lt;/p&gt;
</description>
        <pubDate>Mon, 09 Sep 2024 08:46:04 +0200</pubDate>
        <link>https://trivialperhaps.com/luftgekuhlt-copenhagen</link>
        <guid isPermaLink="true">https://trivialperhaps.com/luftgekuhlt-copenhagen</guid>
        
        
        <category>photography</category>
        
        <category>cars</category>
        
      </item>
    
      <item>
        <title>Triumph crank and head disassembly</title>
        <description>&lt;p&gt;The last time I worked on the 1959 Triumph Bonneville T120 I &lt;a href=&quot;/fabricating-triumph-pinion-puller&quot;&gt;fabricated a triumph pinion puller&lt;/a&gt; and removed the crankshaft from the timing side engine cover. The main reason for removing it totally is to get to the infamous “sludge trap” and clean it. When I removed the left connecting rod it was also apparent that the crank would need to be polished/re-grinded as there was scratches in the surface underneath where the connecting rod is mounted.&lt;/p&gt;

&lt;p&gt;The DIY pinion puller worked and with some heat applied to the engine case I was able to separate the crankshaft from the casing. I did however have one surprising finding, which was that when I had the crankshaft almost out I rotated it and found that it looked incredibly crooked. Like a milimeter or more play on the primary chain side. I cannot fathom how it would be able to work while this being the case, so I am equal part flabergasted and sceptical of what I saw. But no matter what I need to have it checked and if possible straightened.&lt;/p&gt;

&lt;h2 id=&quot;three-part-crankshaft-disassembly&quot;&gt;Three part crankshaft disassembly&lt;/h2&gt;

&lt;p&gt;Disassembling the three part crankshaft was not super difficult. There are 6 bolts (if I remember correctly) holding it together. Once these are removed each side of the cranshaft can be removed from the central flywheel.&lt;/p&gt;

&lt;p&gt;I was able to use a big nail punch to carefully hit either side of the crankshaft just over the point where the connecting rod is attached and then the two farthest points from here. I used very little force with a hammer and after each little strike I looked to see if it moved. Looking through the holes for the bolts that keep the pieces together it is possible to see even the slightest movement as there is no air between the sides when fully assembled. Using this approach I was able to slowly remove either side of the crank from the central flywheel.&lt;/p&gt;

&lt;p&gt;Here are the 3 parts of the crankshaft.&lt;/p&gt;

&lt;p&gt;&lt;img src=&quot;/images/crank-and-head-disassembly/DSCF0047_27mm%20F2%20Ultron,%20Fujifilm%20X-T2,%20Fujifilm%20simulations,%20Motorcycle,%20Tri-X,%20Triumph%20T120,%20Voigtlander.jpg&quot; alt=&quot;Triumph 3 piece crank&quot; /&gt;&lt;/p&gt;

&lt;p&gt;&lt;img src=&quot;/images/crank-and-head-disassembly/DSCF0048_27mm%20F2%20Ultron,%20Fujifilm%20X-T2,%20Fujifilm%20simulations,%20Motorcycle,%20Tri-X,%20Triumph%20T120,%20Voigtlander.jpg&quot; alt=&quot;Triumph 3 piece crank&quot; /&gt;&lt;/p&gt;

&lt;p&gt;I do not know if I can consider it lucky or not, but what I found when everything was disassembled was that the sludge trap looked absolutely fine. There was nothing at all to clean from it.&lt;/p&gt;

&lt;p&gt;But disassembling the engine all the way instead of only focussing on the cylinders and head showed me the wear on the crank, which would have given me problems at some point either way. So better do it properly now.&lt;/p&gt;

&lt;p&gt;&lt;img src=&quot;/images/crank-and-head-disassembly/DSCF0049_27mm%20F2%20Ultron,%20Fujifilm%20X-T2,%20Fujifilm%20simulations,%20Motorcycle,%20Tri-X,%20Triumph%20T120,%20Voigtlander.jpg&quot; alt=&quot;alt&quot; /&gt;&lt;/p&gt;

&lt;p&gt;&lt;img src=&quot;/images/crank-and-head-disassembly/DSCF0050_27mm%20F2%20Ultron,%20Fujifilm%20X-T2,%20Fujifilm%20simulations,%20Motorcycle,%20Tri-X,%20Triumph%20T120,%20Voigtlander.jpg&quot; alt=&quot;alt&quot; /&gt;&lt;/p&gt;

&lt;h2 id=&quot;removing-valves-from-cylinder-head&quot;&gt;Removing valves from cylinder head&lt;/h2&gt;

&lt;p&gt;Once the crankshaft was sorted the next job was to remove the valves from the head to check wear on valves and valve guides.&lt;/p&gt;

&lt;p&gt;&lt;img src=&quot;/images/crank-and-head-disassembly/DSCF0041_27mm%20F2%20Ultron,%20Fujifilm%20X-T2,%20Fujifilm%20simulations,%20Motorcycle,%20Tri-X,%20Triumph%20T120,%20Voigtlander.jpg&quot; alt=&quot;alt&quot; /&gt;&lt;/p&gt;

&lt;p&gt;&lt;img src=&quot;/images/crank-and-head-disassembly/DSCF0042_27mm%20F2%20Ultron,%20Fujifilm%20X-T2,%20Fujifilm%20simulations,%20Motorcycle,%20Tri-X,%20Triumph%20T120,%20Voigtlander.jpg&quot; alt=&quot;alt&quot; /&gt;&lt;/p&gt;

&lt;p&gt;The valves was a bit reluctant to let go but all of them gave way with a snap and then I could remove the retainers and finally remove the valves and valve springs.&lt;/p&gt;

&lt;p&gt;&lt;img src=&quot;/images/crank-and-head-disassembly/DSCF0043_27mm%20F2%20Ultron,%20Fujifilm%20X-T2,%20Fujifilm%20simulations,%20Motorcycle,%20Tri-X,%20Triumph%20T120,%20Voigtlander.jpg&quot; alt=&quot;Triump head with valves remmoved&quot; /&gt;&lt;/p&gt;

&lt;p&gt;All valves had bad valve guides, but the exhaust valves were especially bad.&lt;/p&gt;

&lt;p&gt;I also found that on one of the valves and valve seat some debris had found been stuck and made a significant dent in the valve, while still being present in the valve seat. No need to leak test that valve.&lt;/p&gt;

&lt;p&gt;&lt;img src=&quot;/images/crank-and-head-disassembly/DSCF0044_27mm%20F2%20Ultron,%20Fujifilm%20X-T2,%20Fujifilm%20simulations,%20Motorcycle,%20Tri-X,%20Triumph%20T120,%20Voigtlander.jpg&quot; alt=&quot;Debris on valve&quot; /&gt;&lt;/p&gt;

&lt;p&gt;After close inspection of the head a lot of small cracks also became visible. I think there are 3 or 4 places in total.&lt;/p&gt;

&lt;p&gt;&lt;img src=&quot;/images/crank-and-head-disassembly/DSCF0045_27mm%20F2%20Ultron,%20Fujifilm%20X-T2,%20Fujifilm%20simulations,%20Motorcycle,%20Tri-X,%20Triumph%20T120,%20Voigtlander.jpg&quot; alt=&quot;Cracked Triumph head&quot; /&gt;&lt;/p&gt;

&lt;p&gt;&lt;img src=&quot;/images/crank-and-head-disassembly/DSCF0046_27mm%20F2%20Ultron,%20Fujifilm%20X-T2,%20Fujifilm%20simulations,%20Motorcycle,%20Tri-X,%20Triumph%20T120,%20Voigtlander.jpg&quot; alt=&quot;Cracked Triumph head&quot; /&gt;&lt;/p&gt;

&lt;p&gt;I am more and more surprised that this engine ran, let alone started on first kick every time. I can understand why it felt a bit sluggish though! The compression will have had any number of escape routes to follow. And if the crank really is/was as bent as it seems then there must have been major resistance just in spinning it.&lt;/p&gt;

&lt;p&gt;Now that everything is disassembled I can start working towards being able to re-assemble the engine. First major task is figuring out whether I need a new crank or not. After that I need to figure out whether I can have the head welded to fix the cracks or whether a new head is cheaper.&lt;/p&gt;

&lt;p&gt;If changing the head, then I might as well revisit my thought of putting on a Morgo 750 kit. I abandoned that thought as it would require a new 9 bolt head and did not seem to add that much extra performance. But if I have to look for a new head anyway, then it might be back on the table with a Morgo 750 kit.&lt;/p&gt;

</description>
        <pubDate>Thu, 18 Jan 2024 07:46:04 +0100</pubDate>
        <link>https://trivialperhaps.com/crank-and-head-disassembly</link>
        <guid isPermaLink="true">https://trivialperhaps.com/crank-and-head-disassembly</guid>
        
        
        <category>triumph</category>
        
        <category>motorcycles</category>
        
      </item>
    
      <item>
        <title>Fabricating table from closet door</title>
        <description>&lt;p&gt;I have for some time wanted to build some furniture for our home. Initially I wanted to build a dinner table, but I have not got around to that project yet. Instead I thought about creating a new living room table. Currently our living room table consists of old cut-up pallets and a glass top plate that I have had cut to size. This works okay, but it looks a bit dense and cumbersome with the pallets. Hence the thought arose that I could reuse the glass plate and build a new frame for it.&lt;/p&gt;

&lt;p&gt;After a few sketches and thoughts the selected design was this I have drawn here.&lt;/p&gt;

&lt;p&gt;&lt;img src=&quot;/images/fabricating-table-from-door-01/DSCF0031_27mm%20F2%20Ultron,%20Fujifilm%20X-T2,%20Voigtlander.jpg&quot; alt=&quot;dinner table sketch&quot; /&gt;&lt;/p&gt;

&lt;p&gt;It is nice to have a shelf as part of the design as it can both be used for remote controls, coffee table books and light storage. Hence this design made a lot of sense. The idea is to have a piece of wood on the under- and inner side which can have screws from the inside so that no screws are visible from the outside. I could also have chosen to use a form of mortise and tenon joint, but as I have not tried to do such a joint before and would not have access to the right tools for that to be a succes. I decided to go with the option of attaching an extra piece of wood on the inside to carry the weight of the shelf and join the table together.&lt;/p&gt;

&lt;p&gt;Originally I planned to use a kitchen table top and cut it into pieces. But those table tops were not cheap and I wanted to at least try it before hand on something cheaper, then I could always buy the more expensive wood and try all over again. So I looked through some local classifieds for old or used wood. After some browsing I came upon a guy selling an old door from a closet that looked interesting. It was both wide and long enough to cut the pieces from that I needed. All I had to ensure was that it was not just plywood with a wrap of wood finish. Luckily it turned out to be real wood and I went and bought it for under a fifth of the price of the kitchen table top I had looked at.&lt;/p&gt;

&lt;h2 id=&quot;getting-started&quot;&gt;Getting started&lt;/h2&gt;

&lt;p&gt;Visiting my parents home over the weekend gave me a good excuse to start the little project.&lt;/p&gt;

&lt;p&gt;&lt;img src=&quot;/images/fabricating-table-from-door-01/DSCF0018_.jpg&quot; alt=&quot;alt&quot; /&gt;&lt;/p&gt;

&lt;p&gt;I had changed the blade on my fathers old circular saw, but as I was unsure about how nice a cut it would make I started by cutting the sides for the table 1,5 cm too long. These were cut from either end of the door to have the same cuttings on each.&lt;/p&gt;

&lt;p&gt;&lt;img src=&quot;/images/fabricating-table-from-door-01/DSCF0019_.jpg&quot; alt=&quot;alt&quot; /&gt;&lt;/p&gt;

&lt;p&gt;The saw made a very fine cut and I could have cut it the right length to start with. But I made some small errors pushing the saw, so all in all it was good that I could make the final cut later.&lt;/p&gt;

&lt;p&gt;&lt;img src=&quot;/images/fabricating-table-from-door-01/DSCF0024_.jpg&quot; alt=&quot;alt&quot; /&gt;&lt;/p&gt;

&lt;p&gt;Once I had cut either end from the door I was left with the middle part - obviously. As there is a hole that was used for the door knob I decided to measure out from the middle to get this hole centeret in the shelf of the table. If I had just measured from one end then the hole would have ended up being positioned more to one side than the other.&lt;/p&gt;

&lt;p&gt;&lt;img src=&quot;/images/fabricating-table-from-door-01/DSCF0026_.jpg&quot; alt=&quot;alt&quot; /&gt;&lt;/p&gt;

&lt;p&gt;I was lucjy that this also meant that I could get rid of the only real “fault” in the door, which was a small part that was cracked.&lt;/p&gt;

&lt;p&gt;&lt;img src=&quot;/images/fabricating-table-from-door-01/DSCF0025_.jpg&quot; alt=&quot;alt&quot; /&gt;&lt;/p&gt;

&lt;p&gt;My original plan was to position the shelf halfway up the “legs” so there would be equal amounts of air between the floor and the shelf as between the shelf and the top glass plate. But looking at the rear side of the two ends I had cut to use for end “legs” I saw these holes that was clearly used for the hinges.&lt;/p&gt;

&lt;p&gt;&lt;img src=&quot;/images/fabricating-table-from-door-01/DSCF0027_.jpg&quot; alt=&quot;alt&quot; /&gt;&lt;/p&gt;

&lt;p&gt;Instead of fighting against the material I decided to work with it instead. If I placed the shelf a little higher it could instead cover these holes. As a side-effect these holes are placed very close to the vertical cut seen from the other side.&lt;/p&gt;

&lt;p&gt;&lt;img src=&quot;/images/fabricating-table-from-door-01/DSCF0029_.jpg&quot; alt=&quot;alt&quot; /&gt;&lt;/p&gt;

&lt;p&gt;So all in all I think it will look quite good with the shelf being placed at the same height as this vertical line.&lt;/p&gt;

&lt;p&gt;But this was as far as I made it this day.&lt;/p&gt;

&lt;p&gt;I still need to grind all of it down, make the pieces of wood I will use to connect the end to the shelf and then assemble everything.&lt;/p&gt;

&lt;p&gt;All of that will have to wait till part two though.&lt;/p&gt;
</description>
        <pubDate>Tue, 16 Jan 2024 07:46:04 +0100</pubDate>
        <link>https://trivialperhaps.com/fabricating-table-from-closet-door</link>
        <guid isPermaLink="true">https://trivialperhaps.com/fabricating-table-from-closet-door</guid>
        
        
        <category>fabrication</category>
        
        <category>woodworking</category>
        
      </item>
    
      <item>
        <title>Triumph Bonneville top end removal</title>
        <description>&lt;p&gt;We are close to December here in Denmark and driving season seems over. This means that it is time to get started on the winter projects. I have some smaller things I want to do to the Guzzi, but most of those are for looks and not really needed. That bike just runs and has done so for the entire year.&lt;/p&gt;

&lt;p&gt;What does need some more serious work is the bike I bought unseen from an estate earlier this year. My 1959 Triumph Bonneville T120. I have got it running and got it registered, but apart from its ability to start on first kick, then it does not really run all that well. I have my doubts about both the magneto and the old carburetors with shared reservoir. It seems slow to me and runs worse as it gets warm. So as I know absolutely nothing about the state of the internals I decided to start by removing the head and see the state of valves, bores etc.&lt;/p&gt;

&lt;h2 id=&quot;seat&quot;&gt;Seat&lt;/h2&gt;

&lt;p&gt;First I removed the seat. One of the projects over the winter is creating some sort of “bates competition” seat replica. The original seat has the right lines, but it is too wide seen from behind. And even given the wide nature of the seat it is not all that comfortable - so I will create a better fit for my style and taste. Removing the tank is annoyingly complicated by the fact that the carburetors limit the access to the rear two bolts. I need to see if I can find a solution that deals with this. The bike needs to be easy to disassemble and work on. I might need it.&lt;/p&gt;

&lt;h2 id=&quot;removing-carburetors&quot;&gt;Removing carburetors&lt;/h2&gt;

&lt;p&gt;Removing the carburetors is also somewhat straight forward. There is not too much room for the nuts and bolts - but it is doable. Someone has used metric bolts for one or two of them though. So that has to change. Removing the reservoir is also straight forward. I am contemplating replacing the old carburetor with new ones with individual reservoirs. As much as this shared reservoir is part of the distinct features of the first generation Bonneville, my aim is also to have a bike I can use and go for long rides on. So I won’t be tossing the old away, but keep them if I at some point decide to turn it back to original. But I will probably fit some more modern Amal carburetors, not the least to give a bit better performance.&lt;/p&gt;

&lt;p&gt;&lt;img src=&quot;/images/triumph-top-end-removal/DSCF0053_Fujifilm%20X-T2,%20Fujifilm%20simulations,%20Fujinon,%20Motorcycle,%20Tri-X,%20Triumph%20T120,%20XF%2023mm%201.4%20R.jpg&quot; alt=&quot;alt&quot; /&gt;&lt;/p&gt;

&lt;p&gt;When the carburetors are removed it is a lot easier to unscrew the bolts on the underside of the head that holds the “rocker-boxes”. Then the only real issue is removing the left bolt for the rear rocker-box as it cannot really clear the frame properly. But with it clearing the first down tube it is possible to lift the entire rocker-box and remove it with the bolt still inside the box.&lt;/p&gt;

&lt;p&gt;&lt;img src=&quot;/images/triumph-top-end-removal/DSCF0058_Fujifilm%20X-T2,%20Fujifilm%20simulations,%20Fujinon,%20Motorcycle,%20Tri-X,%20Triumph%20T120,%20XF%2023mm%201.4%20R.jpg&quot; alt=&quot;alt&quot; /&gt;&lt;/p&gt;

&lt;p&gt;Once the rocker-boxer are removed, then it is as easy as unscrewing the last 4 bolts holding the head. I must however say that I was somewhat tricked by the fact that the bolts were held by the oil and vacuum. Meaning that I kept unscrewing the bolts as I could not pull them out and I was unsure about how much thread there was. I did not want to force them if they were bent either. But finally I used a bit of force to get them out and the finally let go and uncovered the fact that they had been held in place by the oil.&lt;/p&gt;

&lt;h2 id=&quot;removing-head&quot;&gt;Removing head&lt;/h2&gt;

&lt;p&gt;Then it is as easy as lifting the head to reveal the state of the cylinders and head. And not too surprising there is a lot of bore-scoring.&lt;/p&gt;

&lt;p&gt;&lt;img src=&quot;/images/triumph-top-end-removal/DSCF0059_Fujifilm%20X-T2,%20Fujifilm%20simulations,%20Fujinon,%20Motorcycle,%20Tri-X,%20Triumph%20T120,%20XF%2023mm%201.4%20R.jpg&quot; alt=&quot;alt&quot; /&gt;&lt;/p&gt;

&lt;p&gt;It is easily seen from the pictures and I can really feel the scratches in the cylinder walls. So the conclusion is that it was a good decision to open the engine.&lt;/p&gt;

&lt;p&gt;&lt;img src=&quot;/images/triumph-top-end-removal/DSCF0060_Fujifilm%20X-T2,%20Fujifilm%20simulations,%20Fujinon,%20Motorcycle,%20Tri-X,%20Triumph%20T120,%20XF%2023mm%201.4%20R.jpg&quot; alt=&quot;alt&quot; /&gt;&lt;/p&gt;

&lt;p&gt;These marks in the cylinder wall can explain the rough running and lack of power. Seeing this also paints a picture of an engine that has not been properly rebuilt in a very long time.&lt;/p&gt;

&lt;p&gt;&lt;img src=&quot;/images/triumph-top-end-removal/DSCF0061_Fujifilm%20X-T2,%20Fujifilm%20simulations,%20Fujinon,%20Motorcycle,%20Tri-X,%20Triumph%20T120,%20XF%2023mm%201.4%20R.jpg&quot; alt=&quot;alt&quot; /&gt;&lt;/p&gt;

&lt;p&gt;So I think the only good way forward is a full restoration. There is something about a “sludge-trap” on these old Triumphs. So even though I can try and feel if there is any issues with conrods or crank, then the sludge-trap-problem speaks to a full disassembly of the engine.&lt;/p&gt;

&lt;p&gt;&lt;img src=&quot;/images/triumph-top-end-removal/DSCF0062_Fujifilm%20X-T2,%20Fujifilm%20simulations,%20Fujinon,%20Motorcycle,%20Tri-X,%20Triumph%20T120,%20XF%2023mm%201.4%20R.jpg&quot; alt=&quot;alt&quot; /&gt;&lt;/p&gt;

&lt;p&gt;Luckily there is a full winter to do this and I really like working on engines.&lt;/p&gt;

&lt;p&gt;&lt;img src=&quot;/images/triumph-top-end-removal/DSCF0064_Fujifilm%20X-T2,%20Fujifilm%20simulations,%20Fujinon,%20Motorcycle,%20Tri-X,%20Triumph%20T120,%20XF%2023mm%201.4%20R.jpg&quot; alt=&quot;alt&quot; /&gt;&lt;/p&gt;
</description>
        <pubDate>Sat, 25 Nov 2023 07:46:04 +0100</pubDate>
        <link>https://trivialperhaps.com/triumph-bonneville-top-end-removal</link>
        <guid isPermaLink="true">https://trivialperhaps.com/triumph-bonneville-top-end-removal</guid>
        
        
        <category>triumph</category>
        
        <category>motorcycles</category>
        
      </item>
    
      <item>
        <title>Jupyter notebook ubuntu poetry</title>
        <description>&lt;p&gt;I recently found some free online courses on deep learning that piqued my interest. They used Jupyter Notebook for some of the material and even though they recommended using kaggle.com I wanted to run it locally.&lt;/p&gt;

&lt;p&gt;My main laptop runs Ubuntu so I had to figure out how to run it on that platform. I did a bit of experimentation with python a couple of years ago but as I found out I had been better of just starting from scratch with the setup as all things I thought was in order turned out not to be. Hence I will write this little guide to myself and potentially others that might need it in the future.&lt;/p&gt;

&lt;p&gt;The one thing I remembered from last time - thanks to this blog - is that I used “Poetry” to control packages. So I wanted to keep using that. As I found out I must have removed it or done something to it as I had to start all over from scratch with that as well. But this guide shows how to get Jupyter Notebook running using poetry.&lt;/p&gt;

&lt;p&gt;First of all I used this guide to install pyenv: &lt;a href=&quot;https://www.laac.dev/blog/setting-up-modern-python-development-environment-ubuntu-20/&quot;&gt;https://www.laac.dev/blog/setting-up-modern-python-development-environment-ubuntu-20/&lt;/a&gt;&lt;/p&gt;

&lt;p&gt;It explains how to do it easily so use the step-by-step guide to install pyenv.&lt;/p&gt;

&lt;p&gt;Next it explains how to install pipx. In order to run Jupyter Notebook we do not need pipx - so you can omit that part.&lt;/p&gt;

&lt;p&gt;Finally it talks about installing Poetry and recommends using other method that pipx. As I did not install pipx this recommendation aligns perfectly.&lt;/p&gt;

&lt;p&gt;You can find the link to installation here: &lt;a href=&quot;https://python-poetry.org/docs/#installing-with-the-official-installer&quot;&gt;https://python-poetry.org/docs/#installing-with-the-official-installer&lt;/a&gt;&lt;/p&gt;

&lt;p&gt;It basically recommends running this curl command to download a script that will take care of the installation. It is also possible to copy the content of the script from that page as well as other options, so please refer to the link above if you do not want to run the script I supply directly.&lt;/p&gt;

&lt;p&gt;But this is the command I ran:&lt;/p&gt;

&lt;p&gt;&lt;code class=&quot;language-plaintext highlighter-rouge&quot;&gt;curl -sSL https://install.python-poetry.org | python3 -&lt;/code&gt;&lt;/p&gt;

&lt;p&gt;Once I had installed Poetry I changed directory into where I wanted to have my Jupyter Notebook test project placed.&lt;/p&gt;

&lt;p&gt;Then I ran:&lt;/p&gt;

&lt;p&gt;&lt;code class=&quot;language-plaintext highlighter-rouge&quot;&gt;poetry new jupyter-test&lt;/code&gt;&lt;/p&gt;

&lt;p&gt;This command creates a folder with the name “jupyter-test” which contains files for the new project. You can see the full specification of what “poetry new” does here: &lt;a href=&quot;https://python-poetry.org/docs/basic-usage/&quot;&gt;https://python-poetry.org/docs/basic-usage/&lt;/a&gt;&lt;/p&gt;

&lt;p&gt;Then I changed directory into the newly created folder:&lt;/p&gt;

&lt;p&gt;&lt;code class=&quot;language-plaintext highlighter-rouge&quot;&gt;cd jupyter-test&lt;/code&gt;&lt;/p&gt;

&lt;p&gt;To install and activate the poetry environment run:&lt;/p&gt;

&lt;p&gt;&lt;code class=&quot;language-plaintext highlighter-rouge&quot;&gt;poetry install&lt;/code&gt;&lt;/p&gt;

&lt;p&gt;Then in order to add/install Jupyter Notebook run:&lt;/p&gt;

&lt;p&gt;&lt;code class=&quot;language-plaintext highlighter-rouge&quot;&gt;poetry add jupyter&lt;/code&gt;&lt;/p&gt;

&lt;p&gt;This will add the Jupyter Notebook files to the directory and project we created.&lt;/p&gt;

&lt;p&gt;And finally to run the Jupyter Notebok I used the following command:&lt;/p&gt;

&lt;p&gt;&lt;code class=&quot;language-plaintext highlighter-rouge&quot;&gt;poetry run jupyter notebook&lt;/code&gt;&lt;/p&gt;

&lt;p&gt;If everything goes to plan, then a webpage will open and you can see the Jupyter Notebook interface.&lt;/p&gt;

&lt;p&gt;In order to open a notebook then just select File -&amp;gt; New -&amp;gt; Notebook&lt;/p&gt;

&lt;p&gt;I hope this helped. If everything goes to plan, then I might update with my progress in the future.&lt;/p&gt;

&lt;p&gt;Happy coding.&lt;/p&gt;
</description>
        <pubDate>Tue, 21 Nov 2023 07:46:04 +0100</pubDate>
        <link>https://trivialperhaps.com/jupyter-notebook-ubuntu-poetry</link>
        <guid isPermaLink="true">https://trivialperhaps.com/jupyter-notebook-ubuntu-poetry</guid>
        
        
        <category>programming</category>
        
        <category>python</category>
        
      </item>
    
      <item>
        <title>Analysis paralysis</title>
        <description>&lt;p&gt;I read a comment on &lt;a href=&quot;https://news.ycombinator.com/item?id=38084567&quot;&gt;Hacker News&lt;/a&gt; that got me thinking about a “problem” that I have, or to be more precise whether it is a problem at all.&lt;/p&gt;

&lt;p&gt;It can be framed as analysis paralysis, which is also what I have titled this piece. But in doing so we have already casted some form of judgment on it. Paralysis is hardly a positive framing.&lt;/p&gt;

&lt;p&gt;But the commenter on HN had an interesting observation:&lt;/p&gt;

&lt;blockquote&gt;
  &lt;p&gt;I have two young kids and I’m constantly  humbled by how fearless they are. They will dive right into a project  that’s way over their heads and just get it wrong until they get it  right. My six year-old found my Lego Technic from 25 years ago and spent a whole month assembling a fully articulated, geared up, complex  helicopter. He built it wrong maybe 15 times. But now he’s this absolute wizard at assembling Technic gear systems.&lt;/p&gt;

  &lt;p&gt;There’s this tremendous  power in “not knowing what you don’t know” that sometime in university  disappeared from me and now I have paralysis:  what if I’m just being  annoying? Will I embarrass myself? I don’t want to waste people’s time.  Am I being pedantic? etc.&lt;/p&gt;
&lt;/blockquote&gt;

&lt;p&gt;On first reading it I thought how right it is. How the naïvité of youth makes young people take on all sorts of challenges, which adults would not. In doing so the kids learn and grow. In contrast grownups analyze the task and takes a shorter route or avoids the task altogether as they have foreseen the potential outcome. By doing so I concluded that the curiosity of youth is lost and hence the adults live a “poorer” life.&lt;/p&gt;

&lt;p&gt;I was just about to write that and ask for a way to switch of that “analysis” and instead throw myself at more projects, tasks etc.&lt;/p&gt;

&lt;p&gt;But then it struck me that perhaps I had the wrong conclusion. Which is why I decided to write myself through the issue and see if I could get to a conclusion.&lt;/p&gt;

&lt;p&gt;Because one of the defining differences between youth and adults is the ability to think through a situation and foresee the potential outcome. Is that not what we get out of all the things we throw ourselves at that fail as youths? Are we not exactly supposed to learn from all the naïve experiences and be better at selecting where to put our effort?&lt;/p&gt;

&lt;p&gt;Are we better off thinking about the consequences or experiencing them?&lt;/p&gt;

&lt;p&gt;This is where I think that there is no right answer.&lt;/p&gt;

&lt;p&gt;I can think of scenarios where having the experience would be the better outcome as well as scenarios where that would not be the case.&lt;/p&gt;

&lt;p&gt;There is probably some middle ground and a default that in my own case leans too far in the direction of analysis. But the experience and learning is also there and should be trusted.&lt;/p&gt;

&lt;p&gt;The question I need to ask myself when my analysis ends up pointing in the direction of inaction is probably whether it points in that direction because of a road that leads me out of my comfort zone? Or because I can actually foresee a loss from the experience? And finally whether that loss is something I can live with and learn from or actually renders the experience not viable.&lt;/p&gt;
</description>
        <pubDate>Tue, 31 Oct 2023 13:46:04 +0100</pubDate>
        <link>https://trivialperhaps.com/analysis-paralysis</link>
        <guid isPermaLink="true">https://trivialperhaps.com/analysis-paralysis</guid>
        
        
        <category>philosophy</category>
        
      </item>
    
  </channel>
</rss>
